Hartmetallgelötete Spitzen C10 C12 C16

Modell Nr .: alle Größen Größe: Mitte Typ: Präzisions-Translations Kopf Zertifizierung: ISO 9001: 2008, SGS Klasse: K10 K20 P10 P20 P30 M10 M20 Yg6 Yg8 Yt5 Yt14 Yt15 Handelsmarke: GW Spezifikation: 33x23x19cm HS-Code: 8208101900 Logo Druck: Gw oder OEM Kundenspezifische: Standard Material: Hartmetall Typen: A10 A12 A16 A20 A32 C10 C12 C16 C20 C32 Lieferzeit: 7 ~ 15 Tage Transport Paket: Standard Exportkarton Herkunft: Zhuzhou Hartmetall Hartgelötete Einsätze \ nTYP: \ nTyp A, Typ B, Typ C, Typ D, Typ E, Typ G \ n \ n \ nGrund: \ nYG3, YG6, YG6X, YG8, YW1, YW2, YT15, YT14, YT5 usw. \ n

GRADE	ISO GRADE	DENSITY (g/cm3)	HARDNESS (HRA)	TRS (N/mm2)	Applications recommended
YG3	K05	15.10	92.0	1400	Suitable for finishing of cast iron and nonferrous metal.
YG6X	K10	14.95	91.5	1800	The finishing & semi-finishing of cast iron and nonferrous metals and also for the machining of manganese steel and hardening steel.
YG6	K15	14.95	90.5	1900	Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG8	K20	14.80	89.5	2200
YW1	M10	13.10	91.6	1600	Suitable for finishing and semi-finishing of stainless steel and conventional alloy steel.
YW2	M20	13.00	90.6	1800	The grade can be used for the semi-finishing of stainless steel and low-alloy steel and it is mainly used for the machining of railway wheel hubs.
YT15	P10	11.4	91.5	1600	Suitable for the finishing and semi-finishing for steel and cast steel with a moderate feed rate and rather high cutting speed.
YT14	P20	11.6	90.8	1700	Suitable for the finishing and semi-finishing of steel and cast steel.
YT5	P30	12.9	90.5	2200	Suitable for the heavy duty rough turning of and cast steel with a big feed rate at a medium and low speed under unfavor

Produktgruppe : Hartmetallgelötete Tipps