Hartmetalldraht-Zeichnung stirbt Nibs Pellet

Modell Nr .: alle Größen Größe: Verschiedene Größen Typ: Drahtziehmaschine Zertifizierung: ISO 9001: 2008 Typen: S11, S13, R, W104, W105, 6X4, 9X6, 16X13, usw. Handelsmarke: GW Spezifikation: 33x23x19cm HS-Code: 8207209000 Firmenzeichen-Drucken: Gw oder Soem besonders angefertigt: Standard oder besonders angefertigt Material: Hartmetall Grad: Yg3, Yg3X, Yg6, Yg6X, Yg8, Yg11, Yg15 Toleranz: Leerzeichen, Ende Schleifen, Ende Schleifen mit Stahlkasten Transport Paket: Standardkasten Ursprung: Zhuzhou Hunan Hartmetall Drahtziehsteine ​​\ n \ n1 & Zeitraum; Unser Vorteil \ n1 100 & percnt; Rohstoff \ n2 HIP Ofen gesintert \ n3 Hochpräzisionsschleifen \ n4 Bohrungsgröße bis zu 0 & Periode; 1mm \ n5 Produzieren Fertigformen mit Stahlgehäuse \ n6 Schnelle Lieferung \ n7 Professioneller Hersteller von Hartmetallprodukten mit 20 Jahren Erfahrung & Periode; \ n8 Komplette Qualität Control System und strenge Inspektion und Zeitraum; \ n \ n2 & Zeitraum; Unsere Formgröße \ nTyp W \ nTypen S11 \ nTypen S12 \ nTypen S13 \ nTypen 22 \ nTypen 23 \ nTypen S30 \ nTypen S40 \ nTypen S41 \ nTypen S42 \ nTypen S60 \ nTypen R \ n \ n3 & Punkt; Notenempfehlung

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Grade	Density(g/cm3)	Hardness(HRA)	TRS(MPa)	Applications recommended
YG6X	14.95	91.5	1800	For drawing steel and nonferrous wires or bars of less than diameter 6.00mm under not so much stress.
YG6	14.95	90.5	1900	For drawing steel, nonferrous alloy bars of less than diameter 20.00mm under more stress and also for drawing tubes of less than diameter 10.00mm.
YG8	14.8	89.5	2200	For drawing steel and nonferrous bars and tubes, also for manufacturing mechanical parts, tools and wear parts.
YG10	14.5	88.5	2400
YG15	14.0	87.0	2800	For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils, drilling and punching and impacting.

Produktgruppe : Hartmetall-Ziehstein