Große Kreissägeblätter für Holz

Modell Nr .: 30x3x10x48T, 63x2x16x80T, 100x3x22x100T Anwendung: Holzsäge, Metallsäge Typ: Fixed Kundenspezifisch: Non-Customized Grade: Yl10.2, Yg15, Yg15X, Ys2t, Yg6X Größe: 30X3.0X10X48t, 63X2.0X16X80t, 63X3.0X16X80t Warenzeichen: GW Spezifikation: 33x33x19cm HS Code: 8208101900 Säge Typ: Kreissäge Marke: Hitachi Stromquelle: Elektrizität Zustand: Neu Toleranz: Finish Grind, Spiegel Polnisch Werkstück: Hartes Holz, Recycling Holz, MDF, Metall Transport Paket: Holzkiste Herkunft : Zhuzhou Hochpräzisions-Wolframkarbid-Sägeblatt

1. Unser Vorteil

1 Qualität, Abendessen scharf + glattes Schneiden + langes Arbeitsleben
2 100% Rohstoff, HIP-gesintert
3 CNC-Schleifen für Zähne, mit hoher Präzision
4 Verschiedene Sorten für verschiedene Arten von Schneidematerial
5 Strenge Qualitätskontrolle, komplette Testausrüstung
6 konkurrenzfähiger Preis
7 Gute Kundendienst

2. Größen

External Dia. (mm)	Internal Dia. (mm)	Thickness (mm)	Teeth
110	16	1.0~7.0	10T
150	20	1.0~7.0	24T
180	25.4	1.0~7.0	30T
185	30	1.0~7.0	36T
230	35	3.0~4.5	40T
235	40	3.0~4.5	48T
250	50	3.0~4.5	60T
255	80	3.0~4.5	72T

3. Grad Empfehlung

Grade	ISO	Density g/m 3	Hardness  HRA	Bending strength	Performance & Application
YG6	K10	14.9	89.5	2150	Suitable for the roughing of cast iron and light alloys and also for the milling of cast iron and low-alloy steel.
YG8	K30	14.6	89	2320
YS2T	M10	14.45	92.5	2800	Suitable for the finishing and semi-finishing of stainless steel and conventional alloy steel.
YN8		14.6	88.5	1710	Wear corrosion resistance&abrasion, especially used in hyperbaric environment.
YN9		14.6	89	1750

yg6/K20	For the cutting of ordinary wood, Recommend to use resistance welding,and the temperature should not be too high
YG8/K30	For the cutting of the ordinary wood,also for the aluminum, Recommend to use resistance welding,and the temperature should not be too high
YK08/K40	For the cutting of the recycling wood especially for some iron nails and stones in it, Recommend to use resistance welding,and the temperature should not be too high
JX5/K20	For the cutting of the hard wood/recycling wood and aluminum, Recommend to use resistance welding,and the temperature should not be too high
YG6X/K10	For the cutting of the wood specially, recommend to use the high frequency welding
YG8X/K10	For the cutting of the wood and aluminum specially, Recommend to use the high frequency welding
K10S	For the cutting of the hard wood specially, Recommend to use the high frequency welding
K20S	For the cutting of the aluminum specially, Recommend to use the high frequency welding
K10UF	For the cutting of the plywood,board with middle to high density and the compound materials with aluminum and plasic, Use the high frequency welding
K20UF	For the cutting of the aluminum specially, Use the high frequency welding
K30UF	For the cutting of the stones specially, Use the high frequency welding
R06	For the cutting of the plywood,density board and the sandwich board, Use the high frequency welding
R03	For the cutting of the timber such as shaving board,laminated boar,density board and compound material etc, Use the high frequency welding
YC40	For the cutting of the large cast materials, Recommend to use the high frequency welding
YC501	For the cutting of the steel and the stainless steel, Recommend to use the high frequency welding

Produktgruppe : Hartmetallsägeblatt