Hartmetall-Draht-Ziehwerkzeuge Yg6 Yg8 etc.

Modell Nr .: S11, S13, R, W104, W105, 6x4, 9x6, 16x13 Größe: Mittel Typ: Flachzangen Zertifizierung: ISO 9001: 2008, SGS Typen: S11, S13, R, W104, W105, 6X4, 9X6 , 16X13, usw. Transport-Paket: Standardkasten Ursprung: Zhuzhou, Hunan Firmenzeichen-Druck: mit Firmenzeichendruck Kundenspezifisch: Kundengebundenes Material: Hartmetall-Grad: Yg3, Yg3X, Yg6, Yg6X, Yg8, Yg11, Yg15 Warenzeichen: G & W Spezifikation: 33x23x19 HS-Code: 8207209000 1. Unsere Vorteile
1 100% Rohstoff
2 HIP Ofen gesintert
3 Hochpräzisionsschleifen
4 Bohrungsgröße bis 0,1mm
5 Fertigwerkzeuge mit Stahlgehäuse herstellen
6 Schnelle Lieferung
7 Professioneller Hersteller von Wolframkarbidprodukten mit 20 Jahren Erfahrung.
8 Komplettes Qualitätskontrollsystem und strenge Inspektion.

2. Unsere Formgröße
Typ W
Typ S11
Typ S12
Typ S13
Typ 22
Typ 23
Typ S30
Typ S40
Typ S41
Typ S42
Typ S60
Typ R

3. Gutachten

Properties of grade
Grade	Density	Hardness (HRA)	TRS	Grain size
	(g/cm3)		(MPa)	(um)
YL01	15.25	93.5	3300	0.8
YL10.2	14.5	92	4000	0.8
YG6	14.95	90	2400	1.6
YG6X	14.95	91.5	1900	1
YG8	14.75	89.5	2800	1.6
YG11	14.4	87.5	3100	1.6
YG15	14.05	87	3000	1.6
Application recommended
Grade	Applications recommended
YL01	Used for drawing diameter less than 1.5 mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous metals with high requirement on surface finish.
YL10.2	Used for drawing diameter between 1.5 mm to 10mm of steel, tungsten and molybdenum wire under high speed drawing as well as nonferrous tubes with high requirement on surface finish.
YG6	Used for drawing the diameter less than 20mm of steel, nonferrous metals and its alloy wire or bar under a moderate stress. It also used for tubes less than diameter of 10mm.
YG6X	Used for drawing the steel wire, nonferrous metals and its alloy wire or bar under the requirement of good wear resistant.
YG8	Used for drawing diameter less than 50 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG11	Used for drawing diameter less than 60 mm of steel, nonferrous and its alloy wire or bar under a moderate stress. It also used for tubes under 35mm.
YG15	Used for steel pipe and steel bar as well as alloy steel bolt and head forging of rivet under a certain big stress

Produktgruppe : Hartmetall-Ziehstein